Blow Torch Head - KLL-Manual Ignition Gas Torch-7016D – Kalilong
Blow Torch Head - KLL-Manual Ignition Gas Torch-7016D – Kalilong Detail:
Parameter
model no. | KLL-7016D |
ignition | Manual ignition |
coonection type | bayonet connection |
weight(g) | 123 |
product material | brass++zinc alloy +stainless steel+plastic |
size(MM) | 184x68x40 |
packaging | 1 pc/blister card 10pcs/inner box 100pcs/ctn |
The Fuel | butane |
MOQ | 1000 PCS |
customized | OEM&ODM |
Lead time | 15-35days |
Product Details
FRONT
BACK
Product Image
Method of operation
Ignition
-Turn the knob slowly in the right direction to start gas flowing then press the trridge in until it clicks.
-Repeat of unit fails to light
Use
-The appliance is now ready for use.Adjust the flame between”-“ and “+”(low and high heat)position as required.
-Be aware of flaring which may occur during the two minute warm-up period and during which the applicane should not be angled more than 15 degrees from the vertical(upight)position.
To shut off
-Close gas supply off completely by turning gas control knob in the “clockwise”(“-”)direction.
-Separate the applicance from the gas cartridge after use.
After Use
-Check the applicance is clean and dry.
-Store in a cool,well ventilated place after separating the cartridge from the appliance and replacing cap.
PRODUCT APPLICATION
Exhibition
Certificate
Factory Tour
Outdoor
Transport And Warehousing
Product detail pictures:
Related Product Guide:
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Blow Torch Head - KLL-Manual Ignition Gas Torch-7016D – Kalilong, The product will supply to all over the world, such as: Tajikistan, Bhutan, Madagascar, We'll supply much better products with diversified designs and expert services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.
By King from Sweden - 2018.09.16 11:31
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Eleanore from European - 2018.12.10 19:03