Cheap PriceList for Soldering Blow Torch - KLL-Manual Ignition Gas Torch-7019D – Kalilong

Parameter

Ignition  & Use:

1. Keep blow torch upright and position the control knob in the “-” position .

2. Holding a match or lighter flame to the nozzle ,turn the control knob slowly towards the “+” position (maximum heat) .

3. Lighting the appliances is easier if gas valve is opened slowly . Ignition can be difficult on full power .

4. The applicance is now ready for use . Adjust the flame between “-”and “+”(low and high hear)position as required.  NB: If applicance does not light , turn control knob back to”-” and repear step 1-2 above

Method of operation

1.How to Operate:

(1) Please check the adjustment whell before the install ,Ensure that the adjustment wheel in the (-) direction of rotation to prevent gas leak after the install .

(2)Push the gas tank into  iron bottle , and hold handle ,push the knob to ignite the fire and revolve adjustable knob  to adjust the fire off /on

(3) Remove the  gas tank according to the direction of the arrow after use .

2.Iginiting and Flame Adjustment:

(1) Turn adjust wheel towards the (+）mark to open the intake valve and push the push button to ignition .

(2) The height of glame will be influenced according to the temperature around ,you can do flame adjustment properly .*Turn adjust wheel towards the (+)mark to higher flame  *Turn adjust wheel towards the (-) mark to lower flame   * Turn adjust wheel to extingusished flame 

3.Waring

(1)Keep your lighter out of reach of children

(2) Ignite lighter away from person and thing ,never touch the head of lighter when keeping burning 30 seconds

(3) Lighter are not self-extinguishing Ensure the flame is extinguished and remove A part from B part after use .

(4) Keep lighter away from naked flame or heat above 55℃

PRODUCT APPLICATION

Exhibition

Certificate

Factory Tour

Outdoor

Transport And Warehousing

Understand more


Cuntact Us