KLL-Manual Ignition Gas Torch-7015D
Parameter
| model no. | KLL-7015D |
| ignition | Manual ignition |
| coonection type | bayonet connection |
| weight（g） | 138 |
| product material | brass+zinc alloy +plastic |
| size（MM） | 155x55x40 |
| packaging | 1 pc/blister card 10pcs/inner box 120pcs/ctn |
| The Fuel | butane |
| MOQ | 1000 PCS |
| customized | OEM&ODM |
| Lead time | 15-35days |
Product Details
FRONT
BACK
Product Image
1. ush the gas cartridge into the base and turn counter-clockwise to secure.
2.Do not force the gas cartridge when installing .
3.Open the gas release knob counter-clockwise slightly to emit a smal amount of gas and light the CANON TORCH by match .
4. Adjust the flame intensity to your particular requirements . Turn gas release knob clockwsie to extinguish the flame . Always remove the gas cartridge after use .
Method of operation
Ignition
-Turn the knob slowly in the right direction to start gas flowing then press the trridge in until it clicks.
-Repeat of unit fails to light
Use
-The appliance is now ready for use.Adjust the flame between”-“ and “+”(low and high heat)position as required.
-Be aware of flaring which may occur during the two minute warm-up period and during which the applicane should not be angled more than 15 degrees from the vertical(upight)position.
To shut off
-Close gas supply off completely by turning gas control knob in the “clockwise”(“-”)direction.
-Separate the applicance from the gas cartridge after use.
After Use
-Check the applicance is clean and dry.
-Store in a cool,well ventilated place after separating the cartridge from the appliance and replacing cap.
PRODUCT APPLICATION
Exhibition
Certificate
Factory Tour
Outdoor
Transport And Warehousing
