Butane Gas Weed Burner

application

Heating is suitable for welding of metal materials, machinery parts processing (with fire), foundry industry (core baking), bare roof (melting bitumen), wooden boat repair (drying), meat processing (removal), communications cable maintenance, old paint baking shovel melted, jewelry processing, wood products baking, granite exterior smooth slippery processing, winter car start heating Butane Gas Weed buner

 LPG firegun is a heating and welding tool fueled by LPG. The correct use of the high temperature can reach 1300°. It has the advantages of low cost, safety and convenience, no pollution and stable performance.

use

1. Inspection: Connect the parts of the spray gun, tighten the gas pipe collet, (or tighten with iron wire) connect the liquefied gas joint, close the switch of the spray gun, loosen the valve of the liquefied gas cylinder, and check whether the parts leak.

 2. Ignition: slightly release the switch of the spray gun, direct ignition at the nozzle outlet, adjust the switch of the spray gun to reach the required temperature.

 3. Close: first close the valve of the liquefied gas cylinder, and then close the switch after flaming out. No residual gas shall be left in the pipe.

 Matters needing attention

 1. This product is strictly forbidden to touch oil

 2. If the gas pipe is found to be scalded, aged and worn, it should be replaced in time

 3. Leave the LPG bottle more than 2 meters before use

 4. Check all parts regularly and keep them sealed

 5. Do not use inferior gas. If the air hole is blocked, loosen the nut before the switch or the nut between the nozzle and the airway