How a flamethrower works
The working principle of the flamethrower is very simple. It is to use compressed gas to adjust the pressure and variable flow of the gas, spray it out of the muzzle and ignite it, thereby forming a high-temperature cylindrical flame.
Heating welding, etc. The Jet Gas Torch Lighter Refillable is divided into two main structures, the gas storage chamber and the pressure regulating chamber, and the medium and high-end products also have an ignition structure. The gas storage chamber is also known as the gas box, which contains gas, ingredients
Typically butane, delivers gas to the tool’s surge chamber structure. The pressure regulating chamber is the main structure of the flamethrower. It receives gas from the gas storage chamber, and then passes through a series of systems such as filtration, pressure regulation and flow conversion.
Follow the steps to spray the gas out of the muzzle. Jet Gas Torch Lighter Refillable
The torch is a tool for fusing welding, surface treatment lakes and local heating of equipment. Generally, ordinary liquefied gas is used, which is convenient and economical, and greatly improves the work efficiency. The flamethrower is safe to use, ingeniously designed and easy to operate. It is an ideal choice for factories, restaurants and other places where flamethrower is used for a long time.
Compared with tools such as welding torches that require pipeline transportation of gas, the portable torch has the advantages of integrated gas box and wireless portability, but it is limited to the factors that the portable torch relies on the oxygen combustion in the air and the gas pressure, and the commonly used portable torch. The flame temperature of the musket generally does not exceed 1400 degrees.
How to use a flamethrower
1. Check
Connect all parts of the spray gun, tighten the gas pipe clamp, (or tighten with iron wire) connect the liquefied gas connector, turn off the switch of the spray gun, loosen the valve of the liquefied gas bottle, and check whether the components are leaking.
2. Ignition
Slightly loosen the spray gun switch, directly ignite at the nozzle outlet, and adjust the spray gun switch to reach the desired temperature.
3. Close
First close the valve of the liquefied gas bottle, and then turn off the switch after the flame is turned off. No residual gas should be left in the pipe. Hang the spray gun and the gas pipe and put it in a dry place.
Common specifications of flamethrower
1. Air box integrated handheld flamethrower: easy to carry, generally smaller in size and lighter in weight than the separate type.
2. Air-box-separated handheld flamethrower head: It needs to be connected to a card-type gas cylinder, which is heavy in weight and volume, but has a large gas storage capacity and can be used for a longer time
Post time: Sep-26-2022