OEM Factory for Peizo Torch - Piezo igniting China manufactory blow torch KLL-6002D – Kalilong

Parameter

Direction of Use:

1.Ignition

1.Turn gas control knob “+” (Counter clock wise) a little

2.Push ignition button

3.When fail ignition ,continue pushing ignition button.

4.Turn thegas adjustment knob to (+)direction to fire control ..

2.To shut off

-Close gas supply off completely by turning gas control knob in the “clockwise”(“-”)direction.
-Separate the applicance from the gas cartridge after use.

3.After Use        

-Check the applicance is clean and dry.

-Store in a cool,well ventilated place after separating the cartridge from the appliance and replacing cap.  

4.CAUTION                                                                                                                     

*Never turn to human body when start ignition    When it’s hot ,ignition could be hard becuase gas pressure is high . Open gas control knob slightly for igniton .

When fire hole s stuffed ,it’s dangerous the fire occures from air ventilation . So please check fire hole before ignition.

Do not turn upside down the fire hole .Liquefied ags makes the ignition hard and the fire would be too big and it’s dangerous .

When this occurs,colse the adjustment knob and stabilize for a moment and then re-ignite. 

PRODUCT APPLICATION

Exhibition

Certificate

Factory Tour

Outdoor

Transport And Warehousing

Understand more


Cuntact Us