Propane Torch Head - KLL-Manual Ignition Gas Torch-7016D – Kalilong
Propane Torch Head - KLL-Manual Ignition Gas Torch-7016D – Kalilong Detail:
Parameter
model no. | KLL-7016D |
ignition | Manual ignition |
coonection type | bayonet connection |
weight(g) | 123 |
product material | brass++zinc alloy +stainless steel+plastic |
size(MM) | 184x68x40 |
packaging | 1 pc/blister card 10pcs/inner box 100pcs/ctn |
The Fuel | butane |
MOQ | 1000 PCS |
customized | OEM&ODM |
Lead time | 15-35days |
Product Details
FRONT
BACK
Product Image
Method of operation
Ignition
-Turn the knob slowly in the right direction to start gas flowing then press the trridge in until it clicks.
-Repeat of unit fails to light
Use
-The appliance is now ready for use.Adjust the flame between”-“ and “+”(low and high heat)position as required.
-Be aware of flaring which may occur during the two minute warm-up period and during which the applicane should not be angled more than 15 degrees from the vertical(upight)position.
To shut off
-Close gas supply off completely by turning gas control knob in the “clockwise”(“-”)direction.
-Separate the applicance from the gas cartridge after use.
After Use
-Check the applicance is clean and dry.
-Store in a cool,well ventilated place after separating the cartridge from the appliance and replacing cap.
PRODUCT APPLICATION
Exhibition
Certificate
Factory Tour
Outdoor
Transport And Warehousing
Product detail pictures:
Related Product Guide:
The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Propane Torch Head - KLL-Manual Ignition Gas Torch-7016D – Kalilong, The product will supply to all over the world, such as: Canberra, Chicago, Karachi, We'll initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products and solutions or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future.
By Irene from Rwanda - 2018.09.29 17:23
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Mike from Myanmar - 2018.07.26 16:51