Torch For Soldering Copper Pipe - KLL-Manual Ignition Gas Torch-7009D – Kalilong
Torch For Soldering Copper Pipe - KLL-Manual Ignition Gas Torch-7009D – Kalilong Detail:
Parameter
model no. | KLL-7006D |
ignition | Manual ignition |
coonection type | bayonet connection |
weight(g) | 243 |
product material | brass+aluminum+zinc alloy +stainless steel+plastic |
size(MM) | 270x120x57 |
packaging | 1 pc/blister card 10pcs/inner box 60pcs/ctn |
The Fuel | butane |
MOQ | 1000 PCS |
customized | OEM&ODM |
Lead time | 15-35days |
Product Details
FRONT
BACK
Product Image
Method of operation
Ignition
-Turn the knob slowly in the right direction to start gas flowing then press the trridge in until it clicks.
-Repeat of unit fails to light
Use
-The appliance is now ready for use.Adjust the flame between”-“ and “+”(low and high heat)position as required.
-Be aware of flaring which may occur during the two minute warm-up period and during which the applicane should not be angled more than 15 degrees from the vertical(upight)position.
To shut off
-Close gas supply off completely by turning gas control knob in the “clockwise”(“-”)direction.
-Separate the applicance from the gas cartridge after use.
After Use
-Check the applicance is clean and dry.
-Store in a cool,well ventilated place after separating the cartridge from the appliance and replacing cap.
PRODUCT APPLICATION
Exhibition
Certificate
Factory Tour
Outdoor
Transport And Warehousing
Product detail pictures:
Related Product Guide:
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Torch For Soldering Copper Pipe - KLL-Manual Ignition Gas Torch-7009D – Kalilong, The product will supply to all over the world, such as: Canada, Switzerland, Mauritius, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
By tobin from Amsterdam - 2017.07.28 15:46
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Beulah from Mexico - 2017.11.11 11:41